Honda Accord 2008 Manual page 1696

07/11/02 09:33:18 61TA0000_200_0129
5. Pry out the holder grommet (A) from the body by
pinching its hooks (B).
＊０５
6. If the side curtain airbag has deployed, replace the
sunvisor with a new one (see page 24-203).
7. If the side curtain airbag has not deployed, to
prevent the side curtain airbags from deploying
improperly and possibly causing injury, inspect
removed sunvisor and replace it if it has any cracks
or breakages:
• Any cracks in the sunvisor bracket (A)
• Any cracks in the sunvisor bracket cover (B)
• Any bends or cracks in the sunvisor stay shaft (C)
• Any cracks in the sunvisor base (D)
• Any cracks in the vanity mirror base (E)
＊０６
A
B
8. If the holder grommet is damaged or stress-
whitened, replace it with a new one.
B
C
E
9. Install the holder (A) to the holder grommet (B) by
turning it 45 ° clockwise, and install them to the
body as an assembly by pushing it until the hooks
(C) snap into place securely.
C
A
10. Connect the vanity mirror light connector (A), and
set the sunvisor (B) by inserting the bracket (C) and
the pin (D) of the bracket cover (E) to the hole in the
body.
C
D
E
B
C
A
D
C
E
B
＊０７
＊０８
A
D
(cont'd)
20-127