Shift Lock Solenoid Replacement - Honda Accord 2008 Manual

07/11/02 09:20:44 61TA0000_140_0311

Shift Lock Solenoid Replacement

Type A Shift Lever
1. Remove the shift lever assembly (see page 14-273).
2. Release the lock tabs (A) retaining the shift lock
solenoid using thin-bladed screwdrivers.
＊０１
A
3. Insert a 6 mm pin (A) into the guide hole (B), and
push the shift lock solenoid (C) out.
E
G
A
4. Disconnect the shift lock solenoid harness
connector (D).
5. Replace the shift lock solenoid, the solenoid
plunger (E), and the plunger spring (F) assembly.
6. Apply silicone grease to the tip (G) of the shift lock
stop and the solenoid plunger.
7. Connect the shift lock solenoid harness connector.
8. Install the shift lock solenoid by aligning the joint of
the shift lock solenoid plunger with the tip of the
shift lock stop, then push the shift lock solenoid into
the shift lever securely.
9. Install the shift lever assembly (see page 14-275).
ＴＡ０８ＡＡ１Ｅ１０４３６４５５１０１ＫＢＡＴ００
F
C
D
B
(cont'd)
14-309
＊０２