Honda Accord 2008 Manual page 1327

07/11/02 09:20:39 61TA0000_170_0061
Power Steering
Steering Gearbox Installation (cont'd)
15. Tighten the right-rear subframe mounting bolt (A)
to the specified torque with the frame positioning
guide pin installed.
＊０８
A
14 x 1.5 mm
103 N·m
(10.5 kgf·m, 75.9 lbf·ft)
Replace.
16. Tighten the left-rear subframe mounting bolt to the
specified torque with the frame positioning guide
pin installed.
17. Tighten the subframe mounting bolts (A) to the
specified torque.
＊０９
B
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
18. Tighten the flange bolts (B) to the specified torque.
17-60
070AG-SJAA10S
A
14 x 1.5 mm
103 N·m
(10.5 kgf·m, 75.9 lbf·ft)
Replace.
19. Tighten the flange bolts (A) to the specified torque.
20. Install the flange nuts (A) to the lower transmission
mount, and tighten them to the specified torque.
A
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
A
12 x 1.25 mm
93 N·m
(9.5 kgf·m, 69 lbf·ft)
Replace.
＊１０
＊１１