07/11/02 09:19:56 61TA0000_140_0287
11. Check that the shift lever is secured in R.
12. Unlock the retainer (A).
*09
13. Rotate the socket holder retainer (A)
counterclockwise (B) until it stops to create
clearance (C) between the socket holder (D) and the
holder retainer, and push in the retainer (E) to lock
it.
*10
A
D
C
B
E
A
14. Align the clearance (A) between the socket holder
(B) and the socket holder retainer (C) with the
opening (D) in the shift cable bracket (E), then slide
the holder into the bracket while installing the shift
cable end (F) over the mounting stud (G) by
aligning its square hole (H) with the square fitting
(I) at the bottom of the stud. Do not install the shift
cable by holding the shift cable guide (J).
NOTE: When the socket holder is installed in the
shift cable bracket, the retainer lock is unhinged
and releases the holder retainer lock, then the
holder retainer returns under spring force to secure
the shift cable.
I
G
H
D
E
B
A
C
J
*11
F
(cont'd)
14-285