Honda Accord 2008 Manual page 942

07/11/02 08:47:46 61TA0000_140_0099
26. Monitor the OBD STATUS for P0713 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES − Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 25,
go to the indicated DTC's troubleshooting.
−
NO If the HDS indicates FAILED, check for poor
connections or loose terminals between the ATF
temperature sensor and the PCM, then go to step 1.
If the HDS indicates NOT COMPLETED, go to step
24.
27. Reconnect all connectors.
28. Update the PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good PCM (see page 14-8).
29. Start the engine with the shift lever in P, and wait
for at least 20 seconds.
30. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P07 13 indicated?
YES − Check for poor connections or loose
terminals between the ATF temperature sensor and
the PCM. If the PCM was updated, substitute a
known-good PCM (see page 14-8), then go to step
29. If the PCM was substituted, go to step 1.
NO − Go to step 31.
31. Monitor the OBD STATUS for P0713 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES − If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 30,
go to the indicated DTC's troubleshooting.
NO − If the HDS indicates FAILED, check for poor
connections or loose terminals between the ATF
temperature sensor and the PCM. If the PCM was
updated, substitute a known-good PCM (see page
14-8), then go to step 29. If the PCM was substituted,
go to step 1. If the HDS indicates NOT COMPLETED,
go to step 29.
14-97