07/11/02 08:47:44 61TA0000_140_0087
45. Measure the voltage between transmission range
switch connector terminals No. 1 and No. 10.
*16
TRANSMISSION RANGE SWITCH CONNECTOR
Is there battery voltage?
YES
−
NO
46. Turn the ignition switch to LOCK (0).
47. Jump the SCS line with the HDS.
48. Disconnect PCM connector B (49P).
ATP RVS (WHT/RED)
GND (BLK)
Wire side of female terminals
−
Go to step 57.
Go to step 46.
49. Check for continuity between PCM connector
terminal B23 and body ground.
PCM CONNECTOR B (49P)
ATP RVS (RED/WHT)
Terminal side of female terminals
Is there continuity?
YES
−
Repair short to body ground in the wire
between PCM connector terminal B23 and the
transmission range switch, then go to step 50.
NO
−
Go to step 57.
*17
(cont'd)
14-85