Honda Accord 2008 Manual page 842

07/11/02 09:25:38 61TA0000_130_0069
6. If the clearance is more than the standard, select a
new 80 mm shim from the following table. If the
clearance measured in step 5 is within the standard,
go to step 9.
80 mm Shim
Part Number
A 41441-PL3-B00
B 41442-PL3-B00
C 41443-PL3-B00
D 41444-PL3-B00
E 41445-PL3-B00
F 41446-PL3-B00
G 41447-PL3-B00
H 41448-PL3-B00
J 41449-PL3-B00
K 41450-PL3-B00
L 41451-PL3-B00
M 41452-PL3-B00
N 41453-PL3-B00
P 41454-PL3-B00
Q 41455-PL3-B00
R 41456-PL3-B00
S 41457-PL3-B00
7. Remove the bolts and transmission housing.
8. Replace the thrust shim selected in step 6, then
recheck the clearance.
9. Reinstall the transmission housing.
Thickness
1.0 mm (0.039 in.)
1.1 mm (0.043 in.)
1.2 mm (0.047 in.)
1.3 mm (0.051 in.)
1.4 mm (0.055 in.)
1.5 mm (0.059 in.)
1.6 mm (0.063 in.)
1.7 mm (0.067 in.)
1.8 mm (0.071 in.)
1.05 mm (0.041 in.)
1.15 mm (0.045 in.)
1.25 mm (0.049 in.)
1.35 mm (0.053 in.)
1.45 mm (0.057 in.)
1.55 mm (0.061 in.)
1.65 mm (0.065 in.)
1.75 mm (0.069 in.)
13-69