Honda Accord 2008 Manual page 1598

07/11/02 09:29:08 61TA0000_200_0031
Front Door Sash Inner Trim Replacement
2-door
NOTE: Take care not to scratch the door.
1. Remove the door panel (see page 20-12).
2. Lower the glass fully.
3. Remove the door sash inner trim (A).
–1 Detach the clips fastening the trim.
–2 Pull back along the outside edge of the trim to
–3 Release the hook (C) from the glass run
–4 Pull back along the outside edge of the trim to
–5 Release the rear hook (F) from the door.
＊０１
Fastener Location
: Clip, 1
(Gray)
D
E
release the hook strip (B) from the door glass
opening flange at the A-pillar portion and the
roof portion of the door sash.
channel (D) at the rear corner portion of the
door sash.
release the hook strip (E) from the door glass
opening flange at the B-pillar portion of the
door sash.
D
E
A
D
C
B
B
F
4. Install the trim in the reverse order of removal, and
note these items:
• If the clip is damaged or stress-whitened, replace
it with a new one.
• Push the hooks and the clip into place securely.
A
A
ＴＡ０８ＡＢ２Ｊ１６１２６７２１５１１ＫＢＡＴ００
20-29