07/11/02 08:47:43 61TA0000_140_0084
Automatic Transmission
DTC Troubleshooting (cont'd)
30. Measure the voltage between transmission range
switch connector terminals No. 3 and No. 10.
*10
TRANSMISSION RANGE SWITCH CONNECTOR
Is there battery voltage?
YES
−
NO
31. Turn the ignition switch to LOCK (0).
32. Jump the SCS line with the HDS.
33. Disconnect PCM connector B (49P).
14-82
ATP D3 (BLU)
GND (BLK)
Wire side of female terminals
−
Go to step 35.
Go to step 31.
34. Check for continuity between PCM connector
terminal B16 and body ground.
PCM CONNECTOR B (49P)
ATP D3 (RED)
Terminal side of female terminals
Is there continuity?
YES
−
Repair short to body ground in the wire
between PCM connector terminal B16 and the
transmission range switch, then go to step 50.
NO
−
Go to step 57.
*11