07/11/02 08:48:09 61TA0000_140_0119
36. Reconnect all connectors.
37. Update the PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good PCM (see page 14-8).
38. Test-drive the vehicle at speeds over 12 mph
(20 km/h) with the shift lever in D, and let the
transmission shift through all five gears.
39. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P07 23 indicated?
−
YES
Check for poor connections or loose
terminals between the output shaft (countershaft)
speed sensor and the PCM. If the PCM was updated,
substitute a known-good PCM (see page 14-8), then
go to step 38. If the PCM was substituted, go to step
1.
−
NO
Go to step 40.
40. Monitor the OBD STATUS for P0723 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES
−
If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 39,
go to the indicated DTC's troubleshooting.
NO
−
If the HDS indicates FAILED, check for poor
connections or loose terminals between the output
shaft (countershaft) speed sensor and the PCM. If
the PCM was updated, substitute a known-good
PCM (see page 14-8), then go to step 38. If the PCM
was substituted, go to step 1. If the HDS indicates
NOT COMPLETED, go to step 38.
14-117