Honda Accord 2008 Manual page 1089

07/11/02 09:18:41 61TA0000_140_0246
Automatic Transmission
Transmission Removal (cont'd)
13. Disconnect the A/T clutch pressure control solenoid
valve A connector (A) and the 2nd clutch
transmission fluid pressure switch connector (B),
and remove the harness clamps (C) from the clamp
brackets (D).
＊０３
C
14. Remove the transmission range switch harness
connector (A) from its bracket (B), then disconnect
it.
＊０４
D
H
14-244
D
D
G
C
B
15. Remove the A/F sensor connector (C) from its
bracket (D), then disconnect it.
16. Disconnect the input shaft (mainshaft) speed
sensor connector (E) and the output shaft
(countershaft) speed sensor connector (F).
17. Remove the harness cover mounting bolt, and
remove the engine wire harness cover (G) from the
ATF filter bracket (H).
C
B
18. Disconnect the shift solenoid wire harness
connector (A), the A/T clutch pressure control
solenoid valve B connector, the A/T clutch pressure
control solenoid valve C connector, and remove the
harness clamp (D) from the clamp bracket (E).
A
E
D
A
F
E
C
B
A
＊０５