Honda Accord 2008 Manual page 1112

07/11/02 09:19:21 61TA0000_140_0269
66. Connect the shift solenoid wire harness connector
(A), the A/T clutch pressure control solenoid valve
B connector (B), and the A/T clutch pressure control
solenoid valve C connector (C), and install the
harness clamp (D) on the clamp bracket (E).
＊３４
E
D
67. Connect the output shaft (countershaft) speed
sensor connector (A) and the input shaft
(mainshaft) speed sensor connector (B).
＊３５
D
H
A
G
C
F
68. Connect the A/F sensor connector (C), then install it
on its bracket (D).
69. Connect the transmission range switch harness
connector (E), then install it on its bracket (F).
70. Install the engine wire harness cover (G) on the ATF
filter bracket (H).
71. Connect the A/T clutch pressure control solenoid
valve A connector (A) and the 2nd clutch
transmission fluid pressure switch connector (B),
and install the harness clamps (C) on the harness
clamp brackets (D).
D
C
B
C
E
D
A
B
＊３６
C
B
A
(cont'd)
14-267