Clutch Disassembly - Honda Accord 2008 Manual

07/11/02 09:22:55 61TA0000_140_0359

Clutch Disassembly

Special Tools Required
• Clutch spring compressor attachment
07LAE-PX40100 or 07HAE-PL50100
• Clutch spring compressor bolt assembly
07GAE-PG40200 or 07GAE-PG4020A
1. Remove the snap ring using a screwdriver.
＊０１
2. Remove the clutch end-plate (A), the clutch discs
(B) (5), the clutch wave-plates (C) (4), the clutch flat-
plate (D) and the waved spring (E) from the 1st
clutch drum (F).
＊０２
E
F
3. Make a reference mark on the clutch flat-plate.
4. Remove the clutch end-plate (A), the clutch discs
(B) (6), the clutch wave-plates (C) (5), the flat-plate
(D), and the waved spring (E) from the 2nd clutch
drum (F).
E
F
5. Make a reference mark on the flat-plate.
A
6. Remove the clutch end-plate (A), the clutch discs
(B) (6), the clutch wave-plates (C) (5), the clutch flat-
B
plate (D), and the waved spring (E) from the 3rd
clutch drum (F).
C
E
D
F
7. Make reference marks on the clutch flat-plate.
ＴＡ０８ＡＥＢＥ１０４１１３１００４１ＬＣＡＴ００
＊０３
A
B
C
D
＊０４
A
B
C
D
(cont'd)
14-357