Honda Accord 2008 Manual page 1657

07/11/02 09:31:12 61TA0000_200_0090
Moonroof
Motor Replacement
1. Remove the headliner (see page 20-130).
2. Put on gloves to protect your hands. Disconnect the
connector (A), and remove the screws, then
remove the motor (B).
＊０１
Fastener Locations
: Screw, 3
3. Install the motor in the reverse order of removal,
and note these items:
• Make sure the connector is plugged in properly.
• Reset the moonroof control unit (see page
22-350).
• Check the motor operation.
20-88 20-88
ＴＡ０８ＡＢ９Ｊ３４２０００４１００１ＫＢＡＴ００
B
5 x 0.8 mm
4 N·m
(0.4 kgf·m, 3 lbf·ft)
Frame and Drain Tube Replacement
SRS components are located in this area. Review the
SRS component locations, 2-door (see page 24-21),
4-door (see page 24-19) and the precautions and
procedures (see page 24-23) before doing repairs or
service.
1. Remove these items:
• Headliner (see page 20-130)
• Moonroof glass (see page 20-83)
2. Disconnect the drain tubes (A).
A
A
ＴＡ０８ＡＢ９Ｊ３４２０００４０８０１ＫＢＡＴ００
A
A
A
＊０１