07/11/02 08:49:05 61TA0000_140_0153
27. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0843 indicated?
YES
−
Check for poor connections or loose
terminals between the 2nd clutch transmission
fluid pressure switch and the PCM. If the PCM was
updated, substitute a known-good PCM (see page
14-8), then go to step 25. If the PCM was substituted,
go to step 1.
NO
−
Go to step 28.
28. Monitor the OBD STATUS for P0843 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES
−
If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 27,
go to the indicated DTC's troubleshooting.
NO
−
If the HDS indicates FAILED, check for poor
connections or loose terminals between the 2nd
clutch transmission fluid pressure switch and the
PCM. If the PCM was updated, substitute a known-
good PCM (see page 14-8), then go to step 25. If the
PCM was substituted, go to step 1. If the HDS
indicates NOT COMPLETED, go to step 25.
14-151