Honda Accord 2008 Manual page 1734

07/11/02 09:36:10 61TA0000_200_0167
Driver's Outer Middle Pad Removal/
Installation
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Take care not to scratch the dashboard and its related
parts.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove the driver's dashboard side vent (see page
20-162).
2. Gently pull out along the edge of the driver's outer
middle pad (A) to detach the hooks (B), then
remove the pad.
＊０５
3. Install the pad in the reverse order of removal, and
push the hooks into place securely.
ＴＡ０８Ａ００Ｊ２６２２０２１９３２４ＫＤＡＴ０２
B
A
B
B
Driver's Inner Middle Pad Removal/
Installation
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Take care not to scratch the dashboard and its related
parts.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove these items:
• Center pocket:
– Without navigation system (see page 20-154)
– With navigation system (see page 20-155)
• Driver's inner dashboard trim (see page 20-153)
• Passenger's dashboard trim (see page 20-159)
• Dashboard center vent (with navigation system)
(see page 20-163)
• Audio-HVAC module:
– Without navigation system (see page 23-111)
– With navigation system (see page 23-109)
2. Gently pull out along the edge of the driver's inner
middle pad (A) to detach the hooks (B), then
remove the pad.
B
A
B
3. Install the pad in the reverse order of removal, and
push the hooks into place securely.
ＴＡ０８Ａ００Ｊ２６２２０２１９３２４ＫＤＡＴ０３
＊０６
20-165 20-165