Honda Accord 2008 Manual page 1214

07/11/02 09:23:32 61TA0000_140_0371
10. Make sure the oil seal of the spring retainer (A) is
properly installed on the clutch piston (B). If the oil
seal was damaged or cracked, replace the spring
retainer.
＊０８
Improperly installed:
B
A
Properly installed:
B
A
11. Install the wave spring (A) in the 1st clutch drum (B).
Install the clutch flat-plate (C) (1), then starting with
the clutch disc, alternately install the clutch discs
(D) (5) and the wave-plates (E) (4). Install the clutch
end-plate (F) with the flat side toward the top disc.
A
B
12. Install the wave spring (A) in the 2nd clutch drum
(B). Install the clutch flat-plate (C) (1), then starting
with the clutch disc, alternately install the clutch
discs (D) (6) and the wave-plates (E) (5). Install the
clutch end-plate (F) with the flat side toward the top
disc.
A
B
＊０９
F
E
D
C
＊１０
F
E
D
C
(cont'd)
14-369