Honda Accord 2008 Manual page 1094

07/11/02 09:18:45 61TA0000_140_0251
41. Remove the cotter pins (A), the castle nuts (B), the
damper pinch bolts (C), the self-locking nuts (D),
the bolts (E), and the damper forks (F), then
separate the ball joints (G) from the lower arms
(see page 18-21).
＊２１
C
F
D
I
H
42. Remove the cotter pins (H) and the nuts (I), and
separate the tie-rod end ball joints from the
knuckles (see step 28 on page 17-40).
G
B
43. Remove the torque converter cover (A), and
remove the drive plate bolts (B) (8) while rotating
the crankshaft pulley.
E
44. Saitama factory produced models: Remove the
shift cable cover (A), then remove the two bolts
securing the shift cable bracket (B).
A
B
A
45. Saitama factory produced models: Remove the
spring clip (C) and the control pin (D), then separate
the shift cable (E) from the selector control lever (F).
Do not bend the shift cable excessively.
B
A
(cont'd)
14-249
＊２２
＊２３
F
D
C
E