Honda Accord 2008 Manual page 1627

07/11/02 09:29:54 61TA0000_200_0060
Mirrors
Rearview Mirror Replacement (cont'd)
With Automatic Dimming Mirror
1. Pry out the rearview mirror harness lower cover (A)
to detach the hooks (B), then slide the lower cover
rearward, and remove the lower cover by
detaching the hooks (C) of the rearview mirror
harness cover base (D).
＊０３
2. Disconnect the connector (A).
＊０４
20-58
C
A
B
3. Using a TORX T20 bit, loosen the screw, then slide
the rearview mirror (A) rearward and off the mount
(B).
Fastener Location
: Screw, 1
C
D
B
4. Install the mirror in the reverse order of removal,
and note these items:
• Before installing the mirror, remove the TORX
screw, and apply medium strength liquid thread
lock to it.
• Make sure the connector is plugged in properly.
A
3/8-24 UNF
4 N·m
(0.4 kgf·m, 3 lbf·ft)
A
＊０５