Honda Accord 2008 Manual page 1614

07/11/02 09:29:46 61TA0000_200_0047
Rear Door Sash Inner Trim Replacement
4-door
NOTE: Take care not to scratch the door.
1. Remove the door panel (see page 20-35).
2. Lower the glass fully.
3. Remove the rear door sash inner trim (A).
–1 Pull back the outside edge of the trim to release
–2 Pull back along the outside edge of the trim to
–3 Release the hook (D) from the glass run
–4 Pull back along the outside edge of the trim to
–5 Release the front hook (G) from the door.
Japan-produced models
＊０１
E
C
C
the rear hook (B) from the door.
release the hooks or hook strip (C) from the
door glass opening flange at the quarter glass
portion and the roof portion of the door sash.
channel (E) at the front corner of the door sash.
release the hooks or hook strip (F) from the
door glass opening flange at the B-pillar
portion of the door sash.
E
F
A
A
C
A
B
USA-produced models
E
C
C
4. Install the trim in the reverse order of removal, and
push the hooks or hook strips into place securely.
E
C
D
F
G
ＴＡ０８ＡＢ４Ｊ１６１６６２２１５１１ＫＢＡＴ１０
E
F
A
A
E
C
G
A
B
20-45
＊０２
D
F