Honda Accord 2008 Manual page 1014

07/11/02 09:15:56 61TA0000_140_0171
12. Jump the SCS line with the HDS.
13. Disconnect PCM connector B (49P).
14. Check for continuity between A/T clutch pressure
control solenoid valve C connector terminal No. 1
and body ground.
＊０３
Is there continuity?
YES
between A/T clutch pressure control solenoid valve
C connector terminal No. 1 and body ground, then
go to step 16.
NO −
A/T CLUTCH PRESSURE CONTROL
SOLENOID VALVE C CONNECTOR
LS C (BLU/YEL)
Wire side of female terminals
− Repair short to body ground in the wire
Go to step 15.
15. Check for continuity between A/T clutch pressure
control solenoid valve C connector terminal No. 1
and PCM connector terminal B26.
PCM CONNECTOR B (49P)
LS C (BLU/YEL)
Terminal side of
female terminals
Is there continuity?
−
YES Go to step 22.
NO − Repair open in the wire between A/T clutch
pressure control solenoid valve C connector
terminal No. 1 and PCM connector terminal B26,
then go to step 16.
A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE C CONNECTOR
LS C (BLU/YEL)
Wire side of
female terminals
(cont'd)
14-169
＊０４