Honda Accord 2008 Manual page 928

07/11/02 08:47:44 61TA0000_140_0085
35. Measure the voltage between transmission range
switch connector terminals No. 9 and No. 10.
＊１２
TRANSMISSION RANGE SWITCH CONNECTOR
Is there battery voltage?
YES
−
NO
36. Turn the ignition switch to LOCK (0).
37. Jump the SCS line with the HDS.
38. Disconnect PCM connector B (49P).
ATP 2-1 (BRN) GND (BLK)
Wire side of female terminals
− Go to step 40.
Go to step 36.
39. Check for continuity between PCM connector
terminal B17 and body ground.
PCM CONNECTOR B (49P)
ATP 2-1 (GRN/RED)
Terminal side of female terminals
Is there continuity?
YES − Repair short to body ground in the wire
between PCM connector terminal B17 and the
transmission range switch, then go to step 50.
NO − Go to step 57.
＊１３
(cont'd)
14-83