07/11/02 09:36:13 61TA0000_200_0173
11. Remove the special bolts (A) from outside the
passenger's door.
–1 Remove the caps (B).
–2 Loosen the special bolt until its threads have
–3 Loosen the bolt again to screw the collar bolt
–4 Remove the bolts.
*15
C
come off the side bracket (C) of the steering
hanger beam. The bolt will be screwed into the
inside threads of the collar bolt (D) by
loosening the bolt. Because of the thread lock
on the threads of the bolt, the bolt and the
collar bolt will be fixed.
into the fixed space adjuster (E) until it is
stopped by the stopper (F). This will provide a
gap (G) between the collar bolt and the body.
A
8 x 1.25 mm
E
D
A
E
G
A
E
F
D
A
D
F
12. Slightly screw the collar bolt (A) into the space
adjuster (B) with 8 mm hexagonal wench.
B
A
8 x 1.25 mm
*16
B
A
(cont'd)
20-171