Honda Accord 2008 Manual page 1695

07/11/02 09:33:17 61TA0000_200_0128
Interior Trim
Sunvisor Removal/Installation
NOTE:
• Put on gloves to protect your hands.
• Take care not to bend or scratch the headliner.
1. Insert a flat-tip screwdriver wrapped with
protective tape through the hole in the front side of
the bracket cover (A), and push the hook (B). Then
make sure the hook is unlocked certainly.
＊０１
A
2. While pushing the hook (A) with a flat-tip
screwdriver wrapped with protective tape, release
the sunvisor (B) from the holder (C), and rotate the
sunvisor backward 45 °. Then make sure the hook
slides into the bracket cover as the rotating the
sunvisor.
＊０２
C
20-126
B
A
B
A
3. Pull the sunvisor (A) down, then release the pin (B)
of the bracket cover (C) from the hole in the body,
and disconnect the vanity mirror light connector (D).
C
A
4. Turn the holder (A) 45 ° counterclockwise, and
remove it from the holder grommet (B) by pulling
the holder down.
B
A
ＴＡ０８Ａ００Ｊ２６２０００５７２９ＰＫＤＡＴ００
B
C
A
B
A
＊０３
D
B
＊０４