Honda Accord 2008 Manual page 1155

07/11/02 09:20:44 61TA0000_140_0312
A/T Interlock System
Shift Lock Solenoid Replacement (cont'd)
Type B Shift Lever
1. Remove the shift lever (see page 14-273).
2. Remove the A/T gear position indicator panel from
the shift lever (see page 14-279).
3. Remove the shift lock solenoid harness (A) from
the harness guide.
4. Release the lock tab (B) retaining the shift lock
solenoid using a thin-bladed screwdriver.
＊０３
D
5. Replace the shift lock solenoid (C), the solenoid
plunger (D), and the plunger spring (E) assembly.
6. Apply silicone grease to the tip (F) of the shift lock
stop and the solenoid plunger.
14-310
A
E
F
7. Install the shift lock solenoid by aligning the joint of
the shift lock solenoid plunger with the tip of the
shift lock stop, then push the shift lock solenoid into
the shift lever securely.
8. Install the A/T gear position indicator panel on the
shift lever (see page 14-279).
9. Tie the harnesses of the park pin switch/A/T gear
position indicator panel light and the shift lock
solenoid at the harness clamp.
10. Install the shift lever (see page 14-275).
C
B