Honda Accord 2008 Manual page 1306

07/11/02 09:19:48 61TA0000_170_0040
19. Remove the inlet line clamp bolt (A) and the return
hose clamp bolt (B).
＊１１
A
6 x 1.0 mm
20. Release the return hose clamp (C), and remove the
return hose (D).
21. Remove the return line clamp bolt (A).
＊１２
A
6 x 1.0 mm
22. Release the return line clamp (B), and remove the
return line (C).
B
6 x 1.0 mm
C
23. Remove the flange bolts from the passenger's side
of the steering gearbox, then remove the gearbox
mounting bracket (A) and mounting cushion (B).
10 x 1.25 mm
D
24. Remove the mounting bolts (A) and the flange bolts
(B) from the driver's side of the steering gearbox,
and remove the stiffener plates (C) and the washers
(D).
B
B
10 x 1.25 mm
C
25. Raise the vehicle on a lift.
A
B
A
14 x 1.5 mm
Replace.
D
(cont'd)
17-39
＊１３
＊１４
C