Transmission Removal - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:18:40 61TA0000_140_0245

Transmission Removal

Special Tools Required

• Engine hanger adapter VSB02C000015

• Engine support hanger, A and Reds AAR-T1256

• Front subframe adapter VSB02C000016

These special tools are available through the Honda

Tool and Equipment Program 1-888-424-6857.

• Use fender covers to avoid damaging painted

• Special tool Reds engine support hanger AAR-T1256

must be used with the side engine mount installed.

1. Secure the hood in the wide open position with the

support rod.

2. Do the battery removal procedure (see page 22-90).

3. Remove the front bulkhead cover.

4. Remove the strut brace (A).

5. Remove the air cleaner assembly (see page 11-385)

and the intake air duct.

6. Remove the bolts securing the under-hood fuse/

relay box, and swing it out of the way.

7. Loosen the two bolts located behind the battery

base, and remove the two bolts securing the

battery base, then remove the battery base.

8. Raise the vehicle on a lift, and make sure it is

securely supported.

9. Remove the front wheels.

10. Remove the splash shield.

11. Remove the drain plug (A), and drain the automatic

transmission fluid (ATF).

12. Reinstall the drain plug with a new sealing washer

ＴＡ０８ＡＥＢＥ１０４１０４０００００ＫＡＡＴ００

(5.0 kgf·m, 36 lbf·ft)

Table of Contents