Honda Accord 2008 Manual page 1054

07/11/02 09:17:35 61TA0000_140_0211
13. Inspect A/T clutch pressure control solenoid valve
C (see page 14-233).
Does A/ T clutch pressure control solenoid valve C
work properly?
YES − Repair the hydraulic system related to shift
valve D, or replace the transmission, then go to
step 19.
NO − Replace A/T clutch pressure control solenoid
C (see page 14-235), then go to step 14.
14. Reconnect all connectors.
15. Turn the ignition switch to ON (II).
16. Clear the DTC with the HDS.
17. Test-drive the vehicle with the shift lever in D, and
let the transmission shift through all five gears.
18. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P17 33 indicated?
−
YES Go to step 8.
NO − Go to step 19.
19. Monitor the OBD STATUS for P1733 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES − Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 18,
go to the indicated DTC's troubleshooting.
−
NO If the HDS indicates FAILED, go to step 8. If
the HDS indicates NOT COMPLETED, go to step 17.
14-209