Honda Accord 2008 Manual page 1495

07/11/02 09:34:58 61TA0000_190_0074
VSA System Components
DTC Troubleshooting (cont'd)
8. Reconnect the VSA modulator-control unit 36P
connector.
9. Update the VSA modulator-control unit if it does
not have the latest software (see page 19-140). If
the unit already has the latest software, substitute a
known-good VSA modulator-control unit (see page
19-141).
10. Test-drive the vehicle. Drive the vehicle at 13 mph
(20 km/h) or more, and go a distance of 328 ft
(100 m) or more.
NOTE: Drive the vehicle on a straight section of
road, not on a lift.
11. Check for DTCs with the HDS.
Is DT C 12-12, 14-12, 16-12, and/ or 18-12
indicated?
−
YES Check for loose terminals in the VSA
modulator-control unit 36P connector. If the VSA
modulator-control unit was updated, substitute a
known-good VSA modulator-control unit (see page
19-141), then retest. If the VSA modulator-control
unit was substituted, go to step 1.
NO − If the VSA modulator-control unit was
updated, troubleshooting is complete. If the VSA
modulator-control unit was substituted, replace the
original VSA modulator-control unit (see page
19-141). If any other DTCs are indicated, go to the
indicated DTCs troubleshooting.
19-74