Honda Accord 2008 Manual page 892

07/11/02 08:46:46 61TA0000_140_0049
PCM CONNECTOR B
Terminal Wire Color
Number
B21 GRN
B22 YEL/GRN
B23 RED/WHT
B25 YEL
B26 BLU/YEL
B27 GRN/RED
B28 RED/YEL
B29 BLU/YEL
B34 GRN/BLK
B38 BLK/WHT
B40 BRN
B48 RED/BLK
△ (49P)
Terminal Name
SH C (SHIFT SOLENOID Drives shift solenoid
VALVE C) valve C
ATP D (TRANSMISSION Detects transmission range
RANGE SWITCH D) switch D position signal
ATP RVS (TRANSMISSION Detects transmission range
RANGE SWITCH RVS) switch R position signal
SH E (SHIFT SOLENOID Drives shift solenoid
VALVE E) valve E
LS C (A/T CLUTCH Drives A/T clutch pressure
PRESSURE CONTROL control solenoid valve C
SOLENOID VALVE C)
SH D (SHIFT SOLENOID Drives shift solenoid
VALVE D) valve D
ATFT (ATF TEMPERATURE Detects ATF temperature
SENSOR) sensor signal
ATP FWD (TRANSMISSION Detects transmission range
RANGE SWITCH FWD) switch D, D3, and
2 positions signal
SG2 (SENSOR GROUND) Sensor ground
NC (OUTPUT SHAFT Detects output shaft
(COUNTERSHAFT) SPEED (countershaft) speed sensor
SENSOR) signal
LS B (A/T CLUTCH Drives A/T clutch pressure
PRESSURE CONTROL control solenoid valve B
SOLENOID VALVE B)
LS A (A/T CLUTCH Drives A/T clutch pressure
PRESSURE CONTROL control solenoid valve A
SOLENOID VALVE A)
Description
With engine running in N, D (in 1st, 3rd, and 5th
gears), D3 (in 1st and 3rd gears), and 1: Battery
voltage
With engine running in P, R, D (in 2nd and 4th
gears), D3 (in 2nd gear), and 2: About 0 V
In D: About 0 V
In any position other than D: Battery voltage
In R: About 0 V
In any position other than R: Battery voltage
With engine running in P and R: Battery voltage
With engine running in N, D, D3 (in 1st gear), 2, and
1: About 0 V
With ignition switch ON (II): Pulses
With engine running in D (in 2nd and 5th gears), D3
(in 2nd gear), and 2: Battery voltage
With engine running in P, R, N, D (in 1st, 3rd, and
4th gears), and D3 (in 1st and 3rd gears): About 0 V
With ignition switch ON (II): About 0.2 4.8 V
depending on ATF temperature
With ignition switch LOCK (0): About 0 V
In D, D3, and 2: About 0 V
In any position other than D, D3, and 2: Battery
voltage
Less than 0.5 V at all times
With ignition switch ON (II): About 0 V or about
5.0 V
With driving: About 2.5 V (pulses)
With ignition switch ON (II): Current controlled
With ignition switch ON (II): Current controlled
Signal
−
(cont'd)
14-47