Atf Cooler Hose Replacement - Honda Accord 2008 Manual

07/11/02 09:19:23 61TA0000_140_0274
Automatic Transmission

ATF Cooler Hose Replacement

1. Slide the ATF cooler hoses (A) on the ATF filter (B)
until they touch the filter housing, and secure the
hoses with the clips (C) at 6 8 mm (0.24 0.31 in.)
(D) from the filter housing.
＊０１
2. Slide the ATF cooler hoses (E) over the ATF cooler
line (F) until the hose ends contact the bulge (G),
and secure the hoses with the clips (H) at 6 8 mm
(0.24 0.31 in.) (I) from the hose end.
3. Slide the ATF cooler hoses (J) over the ATF lines
(K) until the hose ends contact the bulge (L), and
secure the hoses with the clips (M) at 6 8 mm
(0.24 0.31 in.) (N) from the hose end.
4. Install the hose (O) on the clamp (P) at the mark (Q).
14-272
ＴＡ０８ＡＥＢＥ１０４０００１３０１２ＫＢＡＴ００
−
C
D
A
F
H
I
E
G
M
L
N
K
J
−
−
−
C
D
A
B
O
Q
P
−
−