Honda Accord 2008 Manual page 1359

07/11/02 09:28:00 61TA0000_180_0026
Front Suspension
Stabilizer Bar Replacement (cont'd)
9. Remove the power steering pump outlet hose
mounting bolt (A).
＊０３
A
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
10. Remove the front strut brace (if equipped)
(see page 20-287).
18-26
11. Attach the engine hanger adapter (VSB02C000015)
to the threaded hole in the cylinder head.
12. Install the engine support hanger (AAR-T1256),
then attach the hook to the slotted hole in the
hanger adapter. Tighten the wing nut (A) by hand to
lift and support the engine/transmission.
NOTE: Be careful when working around the
windshield.
A
VSB02C000015
AAR-T1256
＊０４
＊０５