Honda Accord 2008 Manual page 1764

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:37:11 61TA0000_200_0197

Special Tools Required

KTC trim tool set SOJATP2014

Available through the American Honda Tool and

Equipment Program; call 888-424-6857

2-door Passenger's Seat

Calibrate the ODS unit after any of the these actions

(see page 24-40):

• Front passenger's seat replacement (including any

seat components)

• Replacement of the seat weight sensors

• After a vehicle collision

• Put on gloves to protect your hands.

• Use the appropriate tool from the KTC trim tool set to

avoid damage when removing components.

• If the side airbag has deployed, replace the seat

frame and related parts with new ones (see page

1. Remove the front seat (see page 20-180).

2. Remove these items:

• Front seat-back cover/pad (see page 20-198)

• Front seat cushion cover/pad (see page 20-204)

• Seat belt buckle (see page 24-10)

• ODS unit (see page 24-232)

• Side airbag (see page 24-209)

3. Slide the front seat frame rearward fully.

4. While releasing the tabs (A), disengage the hooks

(B) from the rear outer seat weight sensor cover (C),

then remove the front outer seat weight sensor

5. Release the tabs (A), then remove the front inner

seat weight sensor cover (B).

ＴＡ０８ＡＢ２Ｊ４６１２７０５３６７６ＫＢＡＴ１０

Chapters

Table of Contents