Honda Accord 2008 Manual page 977

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 08:48:34 61TA0000_140_0134
Automatic Transmission
DTC Troubleshooting (cont'd)
DTC P0752:
Shift Solenoid Valve A Stuck ON
NOTE: Before you troubleshoot, record all freeze data
and any on-board snapshot with the HDS, and review
General Troubleshooting Information (see page 14-4).
1. Warm up the engine to normal operating
temperature (the radiator fan comes on).
2. Make sure that the transmission is filled to the
proper level, and check for fluid leaks.
3. Drain the ATF (see step 3 on page 14-242) through a
strainer. Inspect the strainer for metal debris or
excessive clutch material.
Does the strainer have metal debris or excessive
clutch material?
YES
Replace the transmission, then go to step 14.
NO
Replace the ATF (see page 14-242), then go to
step 4.
4. Turn the ignition switch to ON (II).
5. Clear the DTC with the HDS.
6. Test-drive the vehicle with the shift lever in D, and
let the transmission shift through all five gears.
7. Monitor the OBD STATUS for P0752 in the DTCs
MENU with the HDS.
Does the HDS indicate F AILED?
YES
Go to step 8.
NO
If the HDS indicates PASSED, intermittent
failure, the system is OK at this time. If the HDS
indicates NOT COMPLETED, go to step 6.
8. Clear the DTC with the HDS.
14-132
9. Select Shift Solenoid Valve A in the Miscellaneous
Test Menu, and check that shift solenoid valve A
operates with the HDS.
Is a clicking sound heard?
YES
Go to step 10.
NO
Replace shift solenoid valve A (see page
14-226), then go to step 12.
10. Test-drive the vehicle with the shift lever in D, and
let the transmission shift through all five gears.
11. Monitor the OBD STATUS for P0752 in the DTCs
MENU with the HDS.
Does the HDS indicate F AILED?
YES
Repair shift valve A, or replace the
transmission, then go to step 14.
NO
If the HDS indicates PASSED, intermittent
failure, the system is OK at this time. If the HDS
indicates NOT COMPLETED, go to step 10.
12. Turn the ignition switch to ON (II).
13. Clear the DTC with the HDS.
14. Test-drive the vehicle with the shift lever in D, and
let the transmission shift through all five gears.
TA08AEBK77100090752FAAT00

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents