Honda Accord 2008 Manual page 917

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 08:47:17 61TA0000_140_0074

Automatic Transmission

System Description (cont'd)

Lock-up System (cont'd)

Partial Lock-up

As the speed of the vehicle reaches the programmed value, the PCM turns shift solenoid valve E ON, and shift

solenoid valve E pressure (SE) is applied to the right side of the lock-up shift valve. The lock-up shift valve is moved to

the left side to switch the torque converter pressure (91) port, which goes to the right side of the torque converter, and

torque converter pressure (94) is released from the left side of the torque converter. Torque converter pressure (91)

flows to the right side of the torque converter to engage the torque converter clutch. The PCM also controls A/T clutch

pressure control solenoid valve A to regulate A/T clutch pressure control solenoid valve A pressure (55) which is

applied to the lock-up shift valve and the lock-up control valve. The position of the lock-up control valve depends on

A/T clutch pressure control solenoid valve A pressure (55) and torque converter pressure released from the torque

converter. The lock-up control valve controls the amount of torque converter clutch lock-up until fluid between the

clutch piston and the torque converter cover is fully released; the torque converter clutch is in partial lock-up.

NOTE: When used, ''left'' or ''right'' indicates direction on the hydraulic circuit.

RELIEF VALVE

REGULATOR VALVE

SHIFT SOLENOID VALVE E

A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE A

SHIFT VALVE A and D

MANUAL VALVE

COUNTERSHAFT

Chapters

Table of Contents