Honda Accord 2008 Manual page 1595

07/11/02 09:29:07 61TA0000_200_0028
Doors
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel:
• 2-door (see page 20-12)
• 4-door (see page 20-16)
2. 2-door: Remove the screws, then remove the door
panel bracket (A).
＊０１
Fastener Locations
: Screw, 2
20-26
3. Disconnect the power door lock actuator connector
(A), and detach the harness clips (B). Remove the
plug caps (C). 4-door: Disconnect the power mirror
connector (D).
2-door
C
A
A
4-door
C
A
4. Pass the wire harness (E) through the slit (F) in the
plastic cover (G), then remove the plastic cover.
NOTE: Remove the glue from the door surface. If
the plastic cover is damaged or torn, replace it.
ＴＡ０８Ａ００Ｊ５４４０００２０３７１ＫＢＡＴ１０
G
B
E
B
G
E
B
C
F
D
B
C
F
＊０２
＊０３