Honda Accord 2008 Manual page 1778

07/11/02 09:37:47 61TA0000_200_0211
2. 10-way power seat: Remove the screw, and release
the hook (A), tabs (B), and pin (C), then remove the
front cover (D).
＊０１
Fastener Location
3. 10-way power seat: Remove the recline cover (A).
–1 Remove the screw, and detach the clip.
–2 Detach the tabs (B).
–3 Pull up the cover, then release the hook (C).
–4 Disconnect the power seat adjutment switch
–5 Remove the wire harness (F) from the hooks
＊０２
Fastener Locations
: Screw, 1
F
D
: Screw, 1
C
A
connector (D) and the lumbar support switch
connector (E).
(G).
: Clip, 1
E
B
G
4. Manual height adjustable seat: Pull back the cap (A)
to release the hooks (B), and remove the screws,
then remove the height handle (C).
Fastener Locations
: Screw, 2
B
B
B
D
5. Manual height adjustable seat: Remove the recline
cover (A).
–1 Remove the recline knob (B) and screw.
–2 Gently pull out the cover to detach the clip, and
release the hooks (C, D) and the tabs (E).
Fastener Locations
: Screw, 1
B
B
C
A
C
A
: Clip, 1
D
E
A
C
＊０３
B
＊０４
E
B
(cont'd)
20-209