Honda Accord 2008 Manual page 858

07/11/02 08:45:52 61TA0000_140_0015
(1)
DTC
P1730 (45)
P1731 (45)
P1732 (45)
P1733 (45)
P1734 (45)
U0029 (107)
U0122 (107)
U0155 (107)
NOTE:
(1): The DTC in parentheses is the flash code the D indicator indicates when the data link connector (DLC) is
connected to the HDS, and in the SCS mode.
(2): The MIL comes on when the PGM-FI system detects the same failure.
Two Drive D MIL
Cycle Indicator
Detection
○
Blinks ON
○ Blinks ON
○ Blinks ON
○
Blinks ON
○
Blinks ON
――― Blinks OFF or
(2)
ON
――― Blinks OFF
―――
Blinks OFF or
(2)
ON
Detection Item
Problem in Shift Control System:
• Shift Solenoid Valves A or D Stuck OFF
• Shift Solenoid Valve B Stuck ON
• Shift Valves A, B, or D Stuck
Problem in Shift Control System:
• Shift Solenoid Valve E Stuck ON
• Shift Valve E Stuck
• A/T Clutch Pressure Control Solenoid
Valve A Stuck OFF
Problem in Shift Control System:
• Shift Solenoid Valves B or C Stuck ON
• Shift Valves B or C Stuck
Problem in Shift Control System:
• Shift Solenoid Valve D Stuck ON
• Shift Valve D Stuck
• A/T Clutch Pressure Control Solenoid
Valve C Stuck OFF
Problem in Shift Control System:
• Shift Solenoid Valves B or C Stuck OFF
• Shift Valves B or C Stuck
F-CAN Malfunction
(F-CAN BUS-OFF (PCM))
F-CAN Malfunction
(PCM-VSA Modulator-Control Unit)
F-CAN Malfunction
(PCM-Gauge Control Module)
Page
(see page 14-202)
(see page 14-204)
(see page 14-206)
(see page 14-208)
(see page 14-210)
(see page 14-212)
(see page 14-213)
(see page 14-214)
14-13