Honda Accord 2008 Manual page 1680

07/11/02 09:32:29 61TA0000_200_0113
3. Using a pair of pliers, remove the C-pillar lid clip (A)
by pinching its hooks.
＊１３
4. Hit the surface of the C-pillar trim (A) just upon the
rear clip with a rubber mallet. Hitting the clip slides
the projections (B) on the pin (C) and pushes it into
the grommet (D) and against the body (E).
NOTE: The grommet must be replaced with a new
one when the C-pillar trim is reinstalled.
＊１４
A
A
A
A
D
E
B
5. Pull down the front edge of the C-pillar trim (A)
from the B-pillar upper trim (B) by detaching the
hooks (C), and pull down the roof portion of the
C-pillar trim by detaching the clips and releasing
the projection (D).
Fastener Locations
: Clip, 2
(Gray)
C
B
C
D
C
A
(cont'd)
20-111
＊１５