Honda Accord 2008 Manual page 821

07/11/02 09:25:10 61TA0000_130_0048
Manual Transmission
Countershaft Reassembly (cont'd)
9. Install the needle bearing.
10. Install 2nd gear (A) by aligning the synchro cone
fingers (B) with the 2nd gear grooves (C).
＊０６
11. Support the countershaft (A) on steel blocks, then
install 3rd gear (B) using the 40 mm I.D. driver and
a press (C).
NOTE: Do not exceed the maximum pressure.
＊０７
13-48
12. Install 4th gear (A) using the 40 mm I.D. driver and
A
C
B
13. Install 5th gear (A) using the 40 mm I.D. driver and
C
19,600 N (2,000 kgf,
4,409 lbf) max.
07746-0030100
B
A
a press (B).
NOTE: Do not exceed the maximum pressure.
B
19,600 N (2,000 kgf,
4,409 lbf) max.
07746-0030100
A
a press (B).
NOTE: Do not exceed the maximum pressure.
B
19,600 N (2,000 kgf,
4,409 lbf) max.
07746-0030100
A
＊０８
＊０９