07/11/02 09:34:13 61TA0000_200_0148
Consoles
Center Console Panel Removal/Installation (cont'd)
3. Remove the utility inner pocket (A) from the center
console panel (B) by pulling it up to detach the
hooks (C). Remove the screws, then remove the
beverage holder (D) and the console box trim (E)
from the panel.
*03
Fastener Locations
: Screw
A/T model, 9
M/T model, 13
M/T model
4. M/T model: Remove the screws, then remove the
shift lever boot (F).
20-146
A
C
E
B
F
B
5. Install the console panel in the reverse order of
removal, and note these items:
• Make sure each connector is plugged in properly.
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hook into place securely.
D