Honda Accord 2008 Manual page 1736

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:36:11 61TA0000_200_0169

Column Cover Removal/Installation

• Put on gloves to protect your hands.

• Take care not to scratch or damage the column

• Do not pry the cover surface with any tools.

1. Adjust the steering column to full tilt down position

and to the full telescopic pull position.

2. Remove the column blind cover by detaching the

clips from the upper column cover (see step 1 on

page 20-151).

3. Turn the steering wheel to left, and release the left

tab (A) of the upper column cover (B) while pushing

the lower column cover (C) from the front side.

Carefully release the tabs, and note the

hooks (D) may break when the upper column

cover is pulled up too hard.

4. Turn the steering wheel to right, and release the

right tab of the upper column cover the same as the

5. Insert a suitable sized screwdriver or equivalent

tool (A) along the guide rib (B) into the lever hole

6. Release the hook (E) locating on the left side of the

upper column cover (F). The right side hook (G) of

the upper column cover can't be released from the

7. Remove the upper column cover (A) by lightly

pulling it up by releasing the right side hook (B, C)

of the cover.

ＴＡ０８Ａ００Ｊ２６２２０２５７０７３ＫＤＡＴ００

Chapters

Table of Contents