Honda Accord 2008 Manual page 1440

07/11/02 09:31:48 61TA0000_190_0019
17. Pivot the caliper down into position. Install the
flange bolt (A), and tighten it to the specified torque.
＊１７
A
8 x 1.0 mm
34 N·m (3.5 kgf·m, 25 lbf·ft)
18. Install the brake hose mounting bolt (B).
19. Clean the mating surfaces of the brake disc and the
inside of the wheel, then install the front wheels.
20. Press the brake pedal several times to make sure
the brakes work.
NOTE: Engagement may require a greater pedal
stroke immediately after the brake pads have been
replaced as a set. Several applications of the brake
pedal will restore the normal pedal stroke.
21. Add brake fluid as needed.
22. After installation, check for leaks at hose and line
joints or connections, and retighten if necessary.
Test-drive the vehicle, then recheck for leaks
(see page 19-38).
B
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
19-19