Honda Accord 2008 Manual page 1022

07/11/02 09:15:58 61TA0000_140_0179
22. Reconnect all connectors.
23. Update the PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good PCM (see page 14-8).
24. Start the engine with the shift lever in P, and wait
for at least 1 second. Then drive the vehicle in 1st
gear in D for at least 1 second.
25. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P097 4 indicated?
−
YES Check for poor connections or loose
terminals between shift solenoid valve A and the
PCM. If the PCM was updated, substitute a known-
good PCM (see page 14-8), then go to step 24. If the
PCM was substituted, go to step 1.
−
NO Go to step 26.
26. Monitor the OBD STATUS for P0974 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
−
YES If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 25,
go to the indicated DTC's troubleshooting.
−
NO If the HDS indicates FAILED, check for poor
connections or loose terminals between shift
solenoid valve A and the PCM. If the PCM was
updated, substitute a known-good PCM (see page
14-8), then go to step 24. If the PCM was substituted,
go to step 1. If the HDS indicates NOT COMPLETED,
go to step 24.
14-177