Honda Accord 2008 Manual page 1090

07/11/02 09:18:42 61TA0000_140_0247
19. Remove the ATF cooler hoses (A) from the ATF
cooler lines (B). Turn the ends of the ATF cooler
hoses up to prevent ATF from flowing out, then
plug the ATF cooler hoses and the lines.
＊０６
A
20. Check for any signs of leakage at the hose joints.
21. Disconnect the 3rd clutch transmission fluid
pressure switch connector (A), and remove the
harness clamp (B) from the clamp bracket (C).
＊０７
B
B
A
C
A
22. Remove the vacuum hose (A).
B
23. Disconnect the ATF cooler hose (A) from the ATF
line (B). Turn the end of the ATF cooler hose up to
prevent ATF from flowing out, then plug the hose
and line.
24. Remove the ATF cooler hose from the hose clamp
(C).
A
C
A
B
(cont'd)
14-245
＊０８
＊０９