Honda Accord 2008 Manual page 823

07/11/02 09:25:11 61TA0000_130_0050
Manual Transmission
Countershaft Reassembly (cont'd)
17. Support the ball bearing (A) on steel blocks (B),
then use a press (C) and an attachment (D) to press
the countershaft (E) out of the ball bearing.
＊１２
18. If necessary, install the 35 mm shim selected in
step 16.
19. Install the distance collar (A), 35 mm shim, and new
ball bearing (B) using the 40 mm I.D. driver (C),
30 mm I.D. attachment (D) and a press (E), then
recheck the clearance.
＊１３
D
07746-0030300
13-50
C
A
D
B
E
E
C
07746-0030100
B
20. Securely clamp the countershaft assembly in a
bench vise with wood blocks (A).
21. Tighten the new special bolt (B) (left-hand threads).
NOTE: Apply new MTF to the bolt threads and
flanges.
A
B
20 x 1.5 mm
118 N·m
(12 kgf·m,
87 lbf·ft)
Replace.
A
＊１４