Honda Accord 2008 Manual page 1756

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:37:07 61TA0000_200_0189

Front Seat Lumbar Support Replacement

4-door Driver's Seat (For Some Models)

SRS components are located in this area. Review the

SRS component locations (see page 24-19) and the

precautions and procedures (see page 24-23) before

doing repairs or service.

• Put on gloves to protect your hands.

• Take care not to kink the cable.

• Take care not to tear the seams or damage the seat

1. Remove the front seat (see page 20-180).

2. Remove the back cover (see step 3 on page 20-204).

3. Release the hook strips as needed, then turn over

the seat-back cover (see step 5 on page 20-205).

4. Remove the cable band (A) fastening the lumbar

support cable (B).

5. Release the upper wire (A) from both seat-back side

frames (B) of inside the seat-back.

6. Release the lower wire (A) from both active head

restraint links (B) of inside the seat-back.

ＴＡ０８ＡＢ４Ｊ４６１２７０３７９０１ＫＢＡＴ００

Chapters

Table of Contents