Honda Accord 2008 Manual page 974

07/11/02 08:48:34 61TA0000_140_0131
11. Reconnect all connectors.
12. Turn the ignition switch to ON (II).
13. Clear the DTC with the HDS.
14. Test-drive the vehicle on a level road with a steady
throttle at 60 mph (96 km/h) for at least 20 seconds,
or test-drive the vehicle for several minutes under
the same conditions as those indicated by the
freeze data.
15. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P07 41 indicated?
YES − Go to step 5.
NO − Go to step 16.
16. Monitor the OBD STATUS for P0741 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES − Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 15,
go to the indicated DTC's troubleshooting.
NO − If the HDS indicates FAILED, go to step 5. If
the HDS indicates NOT COMPLETED, go to step 14.
14-129