Honda Accord 2008 Manual page 1005

07/11/02 09:15:54 61TA0000_140_0162
Automatic Transmission
DTC Troubleshooting (cont'd)
25. Reconnect all connectors.
26. Update the PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good PCM (see page 14-8).
27. Start the engine, and wait for at least 1 second.
28. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0962 indicated?
YES − Check for poor connections or loose
terminals between A/T clutch pressure control
solenoid valve A and the PCM. If the PCM was
updated, substitute a known-good PCM (see page
14-8), then go to step 27. If the PCM was substituted,
go to step 1.
NO − Go to step 29.
29. Monitor the OBD STATUS for P0962 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
−
YES If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 28,
go to the indicated DTC's troubleshooting.
−
NO If the HDS indicates FAILED, check for poor
connections or loose terminals between A/T clutch
pressure control solenoid valve A and the PCM. If
the PCM was updated, substitute a known-good
PCM (see page 14-8), then go to step 27. If the PCM
was substituted, go to step 1. If the HDS indicates
NOT COMPLETED, go to step 27.
14-160