Honda Accord 2008 Manual page 1244

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:17:10 61TA0000_160_0005

6. Remove the damper fork mounting nut (A), the

damper fork mounting bolt (B), and the damper

pinch bolt (C), then remove the damper fork (D).

7. Remove the cotter pin (A) from the lower arm ball

joint castle nut (B), and remove the nut, then

separate the ball joint from the lower arm (C) using

the ball joint remover.

• Be careful not to damage the ball joint boot when

installing the remover (see page 18-11).

• Do not force or hammer on the lower arm, or pry

between the lower arm and the knuckle. You

could damage the ball joint.

07MAC-SL0A202

8. Pull the knuckle outward, and separate the

outboard joint from the front wheel hub using a

plastic hammer.

9. Left driveshaft: Pry the inboard joint (A) from the

differential with a prybar. Remove the driveshaft as

an assembly.

NOTE: Do not pull on the driveshaft (B), or the

inboard joint may come apart. Pull the driveshaft

straight out to avoid damaging the oil seal.

Chapters

Table of Contents